The transmission fluid is a very vital part of your engine. Without the appropriate degree of transmission fluid in your vehicle, you will experience all sorts of problems. Additionally, if the transmission fluid is not changed regularly, you will experience problems. Some people have come to think that transmission fluid is something that never requires to be changed. While it does not need to be changed as often as oil does. It is still very essential to check and maintain clean fluids in your vehicle.

 

Ask most drivers and motorists what kind of automatic transmission fluid their vehicles’ transmission takes and you will be consulted with a blank stare. Do you mean that there is more than one kind of transmission fluid? Don’t bother that they should change their car, truck, and van’s automatic transmission fluid on a bi-yearly basis.

Automatic Transmission Fluid

Check automatic transmission fluid monthly and whenever the transmission goes wrong. Right here’s how:

  1. Park your car on a straight land and start the engine, leaving the gear in neutral. Wait for the engine to war. If the car manual does not say anything, let the engine go during this procedure.
  2. Discover the rod of the automatic transmission fluid, located behind the engine. The transmission rod is usually shorter than the rod motor oil, but it looks like the rest. If you are lucky, you will have the ability to find it with a label on it. 
  3. Pull the rod and remove it entirely. It could be very long.
  4. Clean the rod with a cloth and put it back in the engine. Press it all the way, and remove it again.
  5. Check out the rod tip. Look if there are 2 different markings: one for reading cool and one for hot. If so, read the one for hot. If the fluid does not reach the line marked “full”, add liquid.
  6. Add liquid to the hole through which the rod got out. Use a funnel with a long neck and narrow. Add a bit and examine the rod after each cast. It is simple to add transmission fluid but it is challenging to remove if you put too much.
  7. Put the rod in place inside when finished.

 

Tips:

Consult your car handbook to see what kind of transmission fluid should you use. On some vehicles, the engine should not be running while checking the fluid, so make sure to consult the car handbook.